FAQs
11 How many VCA events can I enable on a TVI HUHI DVR ?
A 7200 series HUHI DVR can handle a maximum 2 VCA rules across its input channels and a 7300 series can handle as many VCA rules as there are available per channel and across all channels.
12 What resolutions does the DS-1H33 converter support on its TVI input
The maximum supported resolution is 1080P, if you wish to connect a higher resolution TVI camera you will need to drop the resolution to 1080P in the cameras OSD menu.
13 Will the DS-1H33 TVI to HDMI converter pass coaxial telemetry using the loop through connection ?
The DS-1H33 is not capable of passing coaxial telemetry signals as the loop through is an output only.
14 What are the rules when setting my Hik-connect verification code for either front end or back end device ?
Your verifiaction code can be between 6 to 12 digitas long and can contain lower or upper case letters as well as number digits 0 to 9.
15 How many sub DS-1004KI keyboards can I connect in cascade mode ?
The DS-1004KI supports upto 16 sub keyboards connected to the master unit.
16 What connections do I use when connecting a sub DS-1004KI to the master keyboard under DVR control mode ?
For communication a two core cable needs to be connected between the two units , from the master unit connect the two connections to RA and RB of the AUX2 output. On the sub unit connect RA to TA of CON1 and RB to TB of CON1 on the rear of the sub keyboard.
17 What is the maximum transmission distance through RG59 for a H series 5MP TVI camera connected to a HUHI-F/S DVR ?
Using the exteneded transmission setting available with this model DVR it is possible to achieve upto 800 metres cable run using RG59, although there is a dependancy on the quality and the condition of the RG59 cable being used.
18 What is the wiring configuration for connecting an SC-P620-EB amplified horn speaker using balanced and unbalanced wiring methods ?
For unbalanced transmission use the Green (audio) and Black (ground) cables and disconnect the yellow cable , for balanced transmission use the Green (hot) and Yellow (cold) cables and disconnect the black cable.
19 Does the Hik-Connect connection service support a DDNS facility?
Yes, when you register a device on Hik-connect it will automaticallt set up a DDNS service using the devices serial number as the domain name, you can edit the domain name within you account settings and connect to the device using the DEVICE tab at the bottom of your hik-connect app. Remember to open the ports in your router for the DDNS facility to work.
20 How much current can be passed through the relay output of the Hikvision 2 line and 4 line IP cameras?
The 2 line range can support a maximum of 30mA at a voltage up to 12V DC and the 4 line range can support a maximum of 1A at a voltage up to 30V DC.