HIGHWIRE INTERFACE |
Connector | BNC 75ohm |
Cable | 75ohm (RG59 or similar) |
Range | Up to 300m [1100ft] on RG59, 500m on RG11 [1600ft] at full rate |
Bandwith | 200Mbps (total up + down) |
ETHERNET INTERFACE |
Connector | RJ45 |
Cable | Straight through or cross-over, auto detected |
Rate | 100Base-TX, full duplex with auto negotiation |
LED INDICATORS |
Green €“ Constant | Power OK, full HIGHWIRE data link |
Green €“ Blink | Power OK, no HIGHWIRE link |
Green €“ Off | No power |
Amber €“ Constant | Ethernet link On |
Amber €“ Blink | Network traffic |
POWER |
Unit Power | 1.5 watts |
Connector | Screw terminals with detachable plug |
Power Supply | IEC Class II isolated only |
Operating Voltage | 8-57V DC or 20-28V AC (type and polarity auto detected) |
Supply Current | 120mA (12V), 60mA (24V) |
PHYSICAL/ENVIRONMENTAL |
Dimensions | L 104mm (83mm excluding connectors) W 54mm H 24mm |
Weight | 74g [2.6oz] |
Operating Temperature | -10ºC to 50ºC [14ºF to 122ºF] |
Relative Humidity | 85% non-condensing |
Grounding | Chassis should be grounded and is connected to the BNC shield |
Compliance | CE, FCC, RoHS, UKCA, UL |