POWER |
Input connector | Detachable screw terminal |
Power input | POE OR 57V DC |
Power consumption | 3W - 8W depending on POE load |
POE STANDARDS |
PoE Standards | IEEE 802.3af and IEEE 802.3at compliant |
POE POWER OUTPUT |
PoE Power Output | Between 10W and 100W depending on power source (see table) managed across 2 ports. Max 25 watts per port (POE Plus) |
HIGHWIRE INTERFACE |
Connector type | BNC 75ohm |
Cable type | 75ohm coax cable (RG59, RG6, RG11 or similar) |
Range | Up to 300m on RG59, 350m on RG6, 500m on RG11, all at full rate |
Bandwidth | 200Mbps (total up + down) |
ETHERNET INTERFACE |
Connector type | RJ45 x 2, unmanaged 10/100 switch |
Rates | 10BASE-T or 100BASE-TX and full duplex, auto configuring |
Cable type | Straight through or cross-over Cat 5, Cat 5e or Cat 6 patch |
LED INDICATORS |
RJ45 Yellow | Network link and activity |
RJ45 Green | POE status (on/off) |
Coax Status | Coax link, Base network link, coax power (POE) |
POE Power | Power budget (in steps of 5W) |
PHYSICAL/ENVIRONMENTAL |
Dimensions | L 132mm (inc. BNC) W 75mm H 22mm (W 94.6mm with wall mount lugs) |
Mounting | 4mm mounting holes on 86.1mm centres |
Weight | 172g [6.3oz] (179g with wall mount brackets) [6.3oz] |
Operating temperature | -10ºC to 50ºC [14ºF to 122ºF] |
Relative humidity | 85% non-condensing |
Compliance | CE, FCC, RoHS, UKCA, UL |