Ajax
| Compatibility | |
| Control panels | Hub Plus Hub 2 (2G) Hub 2 (4G) Hub 2 Plus Hub Hybrid (2G) Hub Hybrid (4G) |
| Range extenders | ReX ReX 2 |
| Communication | |
| Jeweller communication technology | Proprietary wireless communication technology to transmit commands, alarms, and events. Key features: Two-way communication. Advanced sabotage protection. Block encryption featuring a dynamic key. Instant notifications. Remote configuration in the Ajax apps. |
| Frequency bands | 868.0€“868.6 MHz |
| Maximum effective radiated power (ERP) | up to 25 mW Automatic power control to reduce power consumption and noise interference. |
| Radio signal modulation | GFSK |
| Radio signal range | up to 1,500 m Between the siren and the hub or range extender in an open space. |
| Encrypted communication | All the data stored and transmitted are protected by block encryption with a dynamic key. |
| Frequency hopping | Radio communication uses frequency hopping to prevent interception and jamming. |
| Key features | |
| Alarm type | acoustic and LED Buzzer and LED. |
| Type of warning device | type X External, self-powered, remote power source with EN 50131-6 compliant power supply. |
| Alarm volume | from 85 to 113 dB at a distance of 1 m Adjusted by PRO or user with admin rights in the Ajax app. |
| Alarm duration | from 3 s to 3 min Adjusted by PRO or user with admin rights in the Ajax app. |
| Siren sound frequency | 1.60ˆ’4.5 kHz |
| Events indication | Alarms. Delays when entering/leaving. Security mode. Security mode changing. After-alarm indication. |
| Chime | The siren makes a special sound to notify that the opening detectors are triggered when the system is disarmed. |
| Jamming detection | The siren detects jamming and alarms about it. |
| Recommendations | The siren is designed for indoor and outdoor use. Recommended installation height is 2.5 m and higher. |
| Customized branded faceplate | |
| Brandplate | Security service providers can print their logo and contact information on the siren€™s front panel. |
| Recommendations | Brandplate is sold separately from street sirens. |
| Sabotage protection | |
| Tamper alarm | Notifications on attempts to detach the siren from the surface or remove it from the mounting panel. |
| Protection against spoofing | device authentication |
| Communication loss detection | after 36 s Detection time depends on the Jeweller or Jeweller/Fibra settings. |
| Main power supply | |
| Batteries | 4 x CR123A 3 VŽ“ Lithium battery Pre-installed. |
| Type | Type C |
| Calculated battery life | up to 5 years |
| Siren€™s operating voltage range | 3.65ˆ’6.2 VŽ“ |
| Siren€™s nominal operating voltage | 6 VŽ“ |
| Quiescent siren€™s current consumption at nominal voltage | 60 µA |
| Peak siren€™s current consumption at nominal voltage | 1.1 A When the siren sounds at the Very Loud volume level. |
| Average siren€™s current consumption at nominal voltage | 454 mA When the siren sounds at the default volume level. Regardless of the arming mode. |
| Full capacity | 6,400 mAh |
| Low battery voltage | 4.25 VŽ“ |
| End of life battery voltage | 3.65 VŽ“ Device is switched off. |
| End of life battery capacity | 460 mAh |
| Manufacturer | Panasonic |
| Optional power supply | |
| Remote power supply€™s operating voltage | 6ˆ’20 VŽ“ |
| Remote power supply€™s nominal voltage | 12 VŽ“ |
| Quiescent siren€™s current consumption at nominal voltage | 0.016 A |
| Average siren€™s current consumption at nominal voltage | 0.29 A When the siren sounds at the default volume level. Regardless of the arming mode. |
| Peak siren€™s current consumption at nominal voltage | 0.36 A When the siren sounds at the Very Loud volume level. |
| Enclosure | |
| Dimensions | 200 x 200 x 55 mm |
| Weight | 517 g |
| Operating temperature range | from ˆ’25°C to +60°C |
| Operating humidity | up to 95% |
| Protection class | IP54 |
| Colours | black or white |
| Complete set | StreetSiren S DoubleDeck Jeweller SmartBracket mounting panel Installation kit Quick start guide |
