Veracity
| POWER | |
| Unit power | 1.5 watts |
| BASE POE In | IEEE 802.3af (POE) or IEEE 802.3at (POE Plus), 2-event, power class 4 |
| CAMERA POE Out | IEEE 802.3af (POE) or IEEE 802.3at (POE Plus) |
| DC Power input | 40-57 volts, 0.7 amps maximum, class 2 isolated, detachable screw terminal |
| HIGHWIRE INTERFACE | |
| Connector type | BNC 75 Ohm |
| Cable type | Any 75 Ohm coaxial (other impedances supported) |
| Range | Up to 300m [1100ft] on RG59 or 500 metres [1600 feet] on RG11 at full rate |
| Bandwidth | 200 Mbps (total up + down) |
| ETHERNET INTERFACE | |
| Connector type | RJ45 |
| Cable type | Patch or crossover, auto-detected |
| Rate | 100Base-TX full-duplex with auto-negotiation |
| LEDS | |
| Status indicators | HIGHWIRE coax link Ethernet link/activity (BASE) Ethernet link/activity (CAMERA) POE-over-coax POE to camera Power available (5/10/15/20/25W) |
| Colours | Off - Disabled. Green - Enabled. Red - Fault |
| PHYSICAL/ENVIRONMENTAL | |
| Dimensions | L 104mm W 54mm H 24mm (84mm excluding connector) |
| Weight | 90g [3.2oz] |
| Operating temperature | -10ºC to 50ºC [14ºF to 122ºF] (delivering POE <15w) -10ºC to 40ºC [14ºF to 104ºF] (delivering POE Plus >15w) |
| Relative humidity | 85% non-condensing |
| Compliance | FCC, CE, RoHS, UKCA, UL |
