Texecom
| Speciï¬cations | |
| Power Supply Type | Type A |
| Mains supply | 100V to 240V (+10%/-15%) @ 50Hz 1A max |
| Battery Voltage Charge | 13.7Vdc +/- 2% |
| Output voltage Range | 10.7V - 13.9V+/- 2% |
| TO14 INCERT Cable Spec | Min/Max cable size 18/14AWG (0.82mm2/2.08mm) |
| Maximum Ripple Voltage | 0.5V pk-pk |
| Output Current Range | 2.3A |
| Maximum available current | 1.5A (0.75A charge rate) 1.6A (2 x 0.3A charge rate) 1.6A (1 x 0.3A charge rate) |
| Current consumption | 115mA |
| Fuses | Mains = 3A (F3AL250V) or 3.15A (3.15AL250V) F1 = 1.6A (F1.6AL250V) |
| Battery Type | Sealed Lead Acid type 1 x 7Ah or 2 x 7Ah or 1 x 17Ah or 1 x 18Ah |
| Battery charge current | 0.3A or 0.75A (selectable) |
| Battery Low Voltage Signal | 11.0V (+/- 5%) at BATT terminal |
| Deep discharge cut-off | 8.6V (+/- 5%) at BATT terminals |
| Output Fault Signal | 10.7V (+/- 5%) |
| Over Voltage Protection | 16V |
| Minimum energy level of the SD in its charged state | 100% (to meet the backup periods speciï¬ed in this manual) |
| Location | The PSU200 should be mounted within the supervised premises. |
| Operating temperature | -10°C to +50°C |
| Maximum humidity | 95% non-condensing |
| Dimensions | 310mm x 410mm x 100mm |
| Packed weight | 4.1Kg (approx) |
| Documents |
|---|
| |
