Pyronix
| Detectors technical characteristics | |
| Blue Wave technology | Yes |
| Digi logic technology | Tri-detection logic |
| Automatic sensitivity | Yes |
| Set sensitivity | Auto or high |
| Digital temperature compensation | Yes |
| Dual element pyro-electric sensor | Yes |
| DEOL resistor on board | Tamper, alarm and mask |
| Tamper protection | 12V DC 50mA both front and rear |
| Intergrated walk test buzzer | Yes |
| Separate LED indication | Top: Microwave, PIR 1 and alarm | Bottom: PIR 2 |
| Digital independent floating threshold (IFT) technology | Yes |
| Standard temperature compensation | Yes |
| Frequency range | 9.9GHz |
| Anti-sway analytics | Yes |
| Waterproof | Yes |
| Casing | 3mm polycarbonate, 0.4mm HDPE in lens area |
| Detectors technical characteristics | |
| Maximum range | 12m |
| Volumetric coverage | 85° coverage |
| Curtain coverage | 17° coverage |
| Animal immunity | Up to 35kg | 1 - 1.5m (mounting height of detector) |
| Tri technology | Yes |
| Detection speed | 0.25 - 2.5 m/s |
| Detection zones | 22 (11 top, 11 bottom) |
| Detection planes | 2 |
| Adjustable antimasking (antispray) | 0 - 1m tri-masking covering all 3 technologies |
| White light filter | Yes |
| Protection | Tri-anti-masking technology | IP55 rated |
| Lens | UV compensated |
| Optics | Dual-Vision Sealed Optics |
| Detection method | Tri-signal detection logic |
| Anti blocking technology | Yes |
| Sensor | 2 low noise dual element passive infrared sensors and a microwave doppler unit |
| Mounting | |
| Wall mounted | Optional brackets: | XD-FIXEDBRACKET | XD-WALLBRACKET | XD-45D-ADAPTER |
| Optimum coverage height | 1.2m |
| Environmental and operating features | |
| Storage temperature | -40C to 80C |
| Certified operating temperature | -30C to 70C |
| Physical dimensions (H x W x D) | 188 x 77 x 84mm (7.4" x 3" x 3.4") |
| Weight | 300g |
| Electrical & battery | |
| Operating voltage | 9-16VDC, 13.8VDC typically |
| Supply current | ~24mA @ 13.8VDC |
| Relay outputs | 3 x SELV limits, 60VDC ~50mA (42.4VAC peak) |
| Tamper switch | 12VDC 50mA both front and rear |
| Certifications and warranty | |
| Environmental class | IV |
| Certification type | Self certified |
| Electrical conformity | CE |
| Warranty | 5 years (excluding lens) |
| Documents |
|---|
