Ajax
| Capacity | |
| Ajax devices | up to 100 Specifically, up to 10 sirens or keypads with a built-in siren and up to 5 range extenders. |
| Ajax NVRs | up to 36 |
| Ajax cameras | up to 224 via Ajax NVRs and up to 492 standalone |
| Third-party IP cameras | up to 10 when using RTSP via SDK up to 224 when using ONVIF via Ajax NVRs |
| Users | up to 50
|
| Automation scenarios | up to 32
|
| Security groups | up to 9 |
| Rooms | up to 50 |
| Event log | up to 1,000 events Events are saved on the non-volatile onboard flash memory. |
| Wireless communication | |
| Jeweller communication technology | Proprietary wireless communication technology to transmit commands, alarms, and events. Key features:
|
| Frequency bands | 866.0€“866.5 MHz 868.0€“868.6 MHz 868.7€“869.2 MHz |
| Maximum effective radiated power (ERP) | up to 25 mW Automatic power control to reduce power consumption and radio interference. |
| Radio signal modulation | GFSK |
| Radio communication range | up to 2,000 m Between a hub and connected devices (in an open space). The maximum range depends on the connected device. |
| Polling interval | from 12 s to 300 s Adjusted by a PRO or user with admin rights in Ajax apps. |
| Encrypted communication | All stored and transmitted data are protected by block encryption featuring a dynamic key. |
| Frequency hopping | To prevent radio interference and jamming. |
| Wings communication technology | Proprietary wireless communication technology to transmit photos. Key features:
|
| Frequency bands | 866.0€“866.5 MHz 868.0€“868.6 MHz 868.7€“869.2 MHz |
| Maximum effective radiated power (ERP) | up to 25 mW Automatic power control to reduce power consumption and radio interference. |
| Radio communication range | up to 2,000 m Between a hub and connected devices (in an open space). The maximum range depends on the connected device. |
| Encrypted communication | All stored and transmitted data are protected by block encryption featuring a dynamic key. |
| Frequency hopping | To prevent radio interference and jamming. |
| Recommendations | Hub BP Jeweller is designed for indoor use only. |
| Communication channels | |
| Cellular | 2 x micro SIM slot |
| Cellular bands | 2G GSM900/DCS1800 (B3/B8) 3G WCDMA 850/900/2100 (B1/B5/B8) 4G (LTE) FDD B1/B3/B5/B7/B8/B20 |
| Automatic switching between communication channels | between SIM cards €” up to 4 minutes |
| Communication channels prioritization | 1. Micro SIM slot 1 2. Micro SIM slot 2 |
| Auto APN | The APN auto select feature allows setting access point automatically based on the installed SIM card. |
| External antenna connectors | Jeweller Wings 4G (LTE) The system will notify of the damaged antenna. |
| Alarm transmission system categories | SP5 |
| Control panel operation method | pass-through |
| Signalling security | S2 Substitution security. |
| Information security | I2 |
| Notifications | |
| Notification types | Push notifications SMS Calls |
| Event types | Alarms Malfunctions Security state change System events Non-security alerts Automation devices Notification types are configured individually for each user. Notifications can be customized for A€“D schemes according to EN 50131 requirements. |
| Photo verification | |
| Photo verification types | Photo by alarm Photo by scenario Photo on demand Photo by schedule The Photo by Schedule feature is available for hubs with OS Malevich 2.19 firmware version or later. |
| Photo delivery time | up to 9 s |
| Photo resolution | up to 640 x 480 pixels |
| Number of photos in a series | from 1 to 5 pictures |
| Monitoring | |
| Supported protocols | SIA DC-09 (SIA-DCS) SurGard (Contact ID) ADEMCO 685 Other proprietary protocols |
| Event types | System alarms and events Panic button coordinates Photo verification |
| Power supply | |
| External | 4.2€“16 VŽ“, up to 2 A Zinc-air battery or external power source. |
| Internal | 4.2€“16 VŽ“, up to 2 A Rechargeable lead-acid and LiFePO4 batteries (not included). Non-rechargeable LTC batteries (not included). |
| Device operating DC voltage range | 3.5€“16 VŽ“ |
| Autonomous operation | |
| On external battery in full function mode | up to 18 months On a 12 VŽ“, 600 Ah, zinc-air non-rechargeable external battery (not included). |
| On external battery in Battery saving mode | more than 5 years On a 12 VŽ“, 600 Ah, zinc-air non-rechargeable external battery (not included). |
| On internal battery in a Battery saving mode | up to 17 months On a 7.2 VŽ“, 95 Ah, LTC non-rechargeable Internal battery NB (7.2V/95Ah) (not included). |
| up to 4 months | On a 6.4 VŽ“, 27 Ah, LiFePO4 rechargeable Internal battery RB (6.4V/27Ah) (not included). |
| up to 2 months | On a 12 VŽ“, 7 Ah, lead-acid rechargeable internal battery (not included). |
| Sabotage protection | |
| Tamper alarm | Notifications on attempts to detach the device from the surface or remove it from the mounting panel. |
| Protection against spoofing | device authentication |
| Frequency hopping | The hub sends notifications to all users and the security company of jamming or losing connection with the devices. |
| Jamming alert | Hub BP Jeweller analyses the channel€™s noise level and the quality of communication with added devices and sends an alert in 30 seconds. |
| Enclosure | |
| Dimensions | 196 x 238 x 100 mm |
| Weight | 1,010 g |
| Operating temperature range | from ˆ’10 °C to +40 °C |
| Operating humidity | up to 75% |
| Protection class | IP40 |
| Colours | Black or white |
| Complete set | Hub BP Jeweller Casing Installation kit Quick start guide |
