Proprietary wireless communication technology to transmit commands, alarms, and events.
Key features:
868.0–868.6 MHz
up to 25 mW
Automatic power control to reduce power consumption and noise interference.
GFSK
up to 2,000 m
Between siren and control panel (or range extender) in an open space.
All the data stored and transmitted are protected by block encryption with a dynamic key.
Radio communication uses frequency hopping to prevent interception and jamming.
acoustic and LED
Buzzer and LED.
type W
Internal, self-powered.
from 81 to 105 dB at a distance of 1 m
Adjusted by PRO or user with admin rights in the Ajax app.
94 dB at a distance of 1 m
Default settings.
from 3 s to 3 min
Adjusted by PRO or user with admin rights in the Ajax app.
3.4 ± 0.5 kHz
3 V?
An additional LED works in parallel with the built-in LED of the siren and fully replicates its indication.
The siren makes a special sound to notify that the opening detectors are triggered when the system is disarmed.
The siren is designed for indoor use only.
Recommended installation height is 2.5 m and higher.
Notifications on attempts to detach the siren from the surface or remove it from the mounting panel.
to secure the siren on SmartBracket
device authentication
after 36 s
Detection time depends on the Jeweller or Jeweller/Fibra settings.
2 × CR123A 3 V? Lithium battery
Pre-installed.
Type C.
up to 5 years
1.9-3.3 V?
3 V?
42 µA
1.1 A
When the siren sounds at the Very Loud volume level.
50 mA
When the siren sounds at the default volume level. Regardless of the arming mode.
3,200 mAh
2.1 V?
1.9 V?
Device is switched off.
366 mAh
Panasonic
75 × 76 × 27 mm
92 g
94 g
from -10°C to +40°C
up to 75%
IP50, IK06
Superior HomeSiren Jeweller
SmartBracket mounting panel with holding screw
2 CR123A batteries (pre-installed)
Connector for LED indicator
Installation kit
Quick start guide