Ajax
| Specifications | |
| Compatibility | Control panels Hub 2 (2G) Jeweller Hub 2 (4G) Jeweller Hub 2 Plus Jeweller Hub Hybrid (2G) Hub Hybrid (4G) Range extenders ReX 2 Jeweller Ajax devices compatibility |
| Communication | |
| Jeweller communication technology | Proprietary wireless communication technology to transmit alarms and events. Key features:
|
| Frequency bands | 868.0€“868.6 MHz |
| Maximum effective radiated power (ERP) | up to 20 mW Automatic power control to reduce power consumption and noise interference. |
| Radio signal modulation | GFSK |
| Radio signal range | up to 1,700 m Between detector and control panel (or range extender) in an open space. |
| Encrypted communication | All the data stored and transmitted are protected by block encryption with a dynamic key. |
| Frequency hopping | Radio communication uses frequency hopping to prevent interception and jamming. |
| Wings communication technology | Proprietary wireless communication technology to transmit photo verifications. Key features:
|
| Frequency bands | 868.0€“868.6 MHz |
| Radio signal range | up to 1,700 m Between detector and hub or range extender in an open space. |
| Encrypted communication | All the data stored and transmitted are protected by block encryption with a dynamic key. |
| Frequency hopping | Radio communication uses frequency hopping to prevent interception and jamming. |
| Detection | |
| Sensitive element | PIR sensor |
| Motion detection distance | up to 12* m When installed at a height of 2.4 m. * €” 10 m according to INCERT (with high sensitivity level) |
| Motion detection angles | horizontal: 88.5° |
| Motion detection speed | rom 0.3 to 2.0 m/s The direction of the detector lens should be perpendicular to an alleged intrusion path into the facility. |
| Sensitivity | 3 levels Adjusted by PRO or user with admin rights in the Ajax app |
| Pet immunity | weight: up to 20 kg height: up to 50 cm |
| False alarm prevention | SmartDetect Software algorithm. |
| Temperature compensation | Effective motion detection at temperatures from ˆ’10°C to +40°C. |
| Photo verification | |
| Photo by Alarm | A built-in camera is activated if the detector is armed and motion is detected. |
| Photo on Demand | The user takes pictures at any time or when the detector is armed (depending on settings). The feature is disabled by default. |
| Photo by Scenario | The detector€™s camera takes pictures automatically when other Ajax detectors are triggered. The feature is disabled by default. |
| Photo by Schedule | The detector automatically takes photos at a specified time. This feature is available for hubs (except Hub Jeweller) with firmware version OS Malevich 2.19 or higher. |
| Adjustable photo resolution | 640 x 480 px 320 x 240 px (by default) 160 x 120 px Adjusted by PRO or user with admin rights in the Ajax app. |
| IR backlight | For night photography and low light conditions. |
| Series of pictures | from 1 to 5 images with a resolution of 320 x 240 px or 160 x 120 px from 1 to 3 images with a resolution of 640 x 480 px Adjusted by PRO or user with admin rights in the Ajax app. |
| Photo delivery time | up to 7 s €” 160 x 120 px resolution up to 9 s €” 320 x 240 px resolution up to 20 s €” 640 x 480 px resolution |
| Recommendations | |
| Recommendations | It is recommended to install the detector at a height of 2.4 m. The device is designed for indoor use only. |
| Sabotage protection | |
| Tamper alarm | Notifications on attempts to detach the detector from the surface or remove it from the mounting panel. |
| Holding screw | to secure the detector on SmartBracket |
| Protection against spoofing | device authentication |
| Communication loss detection | after 36 s Detection time depends on the Jeweller or Jeweller/Fibra settings. |
| Power supply | |
| Batteries | 2 x CR123A Pre-installed. |
| Type | Type C |
| Calculated battery life | up to 4 years - With Photo on demand toggle disabled. up to 3 years - With Photo on demand toggle enabled. |
| Detector€™s operating voltage range | 4.2ˆ’6.2 VŽ“ |
| Detector€™s nominal operating voltage | 6 VŽ“ |
| Quiescent detector€™s current consumption at nominal voltage | 0.058 mA |
| Maximum detector€™s current consumption at nominal voltage | 18 mA |
| Full capacity | 3,300 mAh |
| Low battery voltage | 4.55 VŽ“ |
| Low battery recovery voltage | 4.9 VŽ“ |
| End-of-life battery voltage | 4.2 VŽ“ Device is switched off. |
| End-of-life battery capacity | 600 mAh |
| Manufacturer | Panasonic |
| Enclosure | |
| Dimensions | 135 x 70 x 60 mm |
| Weight of the white device | 165 g |
| Weight of the black device | 149 g |
| Operating temperature range | from ˆ’10 °C to +40 °C |
| Operating humidity | up to 75% |
| Protection class | IP50, IK04 |
| Colours | Black or white |
| Complete set | MotionCam S (PhOD) Jeweller SmartBracket mounting panel with holding screw 2 x CR123A battery (pre-installed) Installation kit Quick start guide |
