Ajax
| Communication | |
| Fibra communication technology | Proprietary wired communication technology. Fibra combines the reliability of wires with the freedom of radio connection. Key features: Two-way communication. Advanced anti-sabotage. Block encryption featuring a dynamic key. Instant notifications. Remote configuration in Ajax apps. |
| Line connection | 4-core cable |
| Connection | to any point of the Fibra line KeyPad TouchScreen Fibra can be installed after a hub, detector, siren, or other keypad. |
| Fibra line length | up to 2,000 m When using the U/UTP cat.5 twisted pair cable. |
| Encrypted communication | All stored and transmitted data are protected by block encryption featuring a dynamic key. |
| Display | |
| Diagonal | 5€³ |
| Matrix type | IPS |
| Resolution | 480 x 854 px |
| Sensor | capacitive |
| Brightness settings |
|
| Backlight lifetime | 30,000 hours Guaranteed backlight lifetime when the Always Active Display toggle is enabled. It can be adjusted in Ajax apps and activates only when external power is connected. |
| User interface | Light/Dark |
| Key features | |
| Panic buttons |
|
| Control |
|
| Contactless access | DESFire® EV1, EV2 ISO 14443-Ð (13.56 MHz) |
| Access codes | up to 50 personal codes One code per each user. The number of personal access codes depends on the hub model. 1 keypad code Per each KeyPad TouchScreen. |
| Duress codes | up to 50 personal codes One code per each user. The number of personal duress codes depends on the hub model. 1 keypad code Per each KeyPad TouchScreen. |
| Codes for unregistered people | up to 50 personal codes For people who are not registered in the Ajax system. The number of such codes depends on the hub model. |
| Arming without entering a code | The enabled feature allows the user to arm the system without entering a code or presenting the access device. |
| Group management | Changing the security mode of the groups to which the user has access from the keypad€™s display. |
| Scenarios management | A separate keypad tab contains up to 6 buttons, and each one can control one automation device or a group of devices. |
| Indication of malfunctions and security mode |
|
| Fire alarm muting | Turns off the fire detectors alarm, including the interconnected alarm. |
| User pre-authorization | When the feature is enabled, viewing the current system status and control screen is unavailable. For access, the user must pre-authorize: enter a code or present a personal access device to the keypad. |
| Contactless authorization with a smartphone | A smartphone with the installed Ajax app and Bluetooth Low Energy (BLE) support can be used instead of Tag or Pass to authorize a user. BLE is a radio protocol with low power consumption. The keypad supports Android and iOS smartphones with BLE 4.2 and higher. |
| Auto screen wakeup | The keypad wakes up automatically when approaching it. The approaching distance can be adjusted in the app. |
| Remote firmware update | When a new firmware is available, an admin or PRO with the rights to configure the system can run the update in Ajax apps. |
| Recommendations | The device is designed for indoor use only. Please note that the keypad must be connected to an external power supply to keep the screen always active. |
| Sabotage protection | |
| Unauthorized access auto-lock | The keypad locks if an incorrect code is entered or unverified access devices are used more than 3 times in a row within 1 minute. The lock time is adjusted by a PRO or a user with admin rights in the Ajax app. |
| Tamper alarm | Notifications on attempts to detach the keypad from the surface or remove it from the mounting panel. |
| Holding screw | To secure the keypad on SmartBracket. |
| Protection against spoofing | device authentication |
| Communication loss detection | after 36 s Detection time depends on the Jeweller or Jeweller/Fibra settings. |
| Power supply | |
| Fibra line | 7ˆ’30 VŽ“, up to 54.6 mA The keypad is powered by the control panel. Connect the external power supply for the Always Active Display mode. |
| Backup batteries | 2 x LTO AA Pre-installed. |
| External power supply | 10.5€“14 VŽ“, from 0.5 A The recommended voltage of the power supply is 12 VŽ“. External power supply is not included. It is needed for the Always Active Display mode. |
| Enclosure | |
| Dimensions | 171 x 82 x 28 mm |
| Weight | 327 g |
| Operating temperature range | from -10 °C to +40 °C |
| Operating humidity | up to 75% |
| Colours | Black or white |
| Complete set | |
| Complete set | KeyPad TouchScreen Fibra SmartBracket mounting panel 2 LTO AA backup batteries (pre-installed) Installation kit Quick start guide |
