Ajax
| Compatibility | |
| Control panels | Hub 2 (2G) Jeweller Hub 2 (4G) Jeweller Hub 2 Plus Jeweller Hub Hybrid (2G) Hub Hybrid (4G) Range extenders ReX 2 Jeweller Ajax devices compatibility |
| Communication | |
| Jeweller communication technology | Proprietary wireless communication technology to transmit alarms and events. Key features: Two-way communication. Advanced anti-sabotage. Block encryption featuring a dynamic key. Instant notifications. Remote configuration via the Ajax apps. |
| Frequency bands | 866.0€“866.5 MHz 868.0€“868.6 MHz 868.7€“869.2 MHz 905.0€“926.5 MHz 915.85€“926.5 MHz 921.0€“922.0 MHz |
| Maximum effective radiated power (ERP) | up to 20 mW |
| Radio signal modulation | GFSK |
| Radio signal range | up to 1,700 m |
| Encrypted communication | All the data stored and transmitted are protected by block encryption with a dynamic key. |
| Frequency hopping | Radio communication uses frequency hopping to prevent interception and jamming. |
| Wings communication technology | Proprietary wireless communication technology to transmit photo verifications. Key features: Two-way communication. Block encryption featuring a dynamic key. Advanced anti-sabotage. Data package reloading in case of transmission errors. Photo delivery check. |
| Frequency bands | 866.0€“866.5 MHz 868.0€“868.6 MHz 868.7€“869.2 MHz 905.0€“926.5 MHz 915.85€“926.5 MHz 921.0€“922.0 MHz |
| Radio signal range | up to 1,700 m |
| Encrypted communication | All the data stored and transmitted are protected by block encryption with a dynamic key. |
| Frequency hopping | Radio communication uses frequency hopping to prevent interception and jamming. |
| Detection | |
| Sensitive element | 1 PIR sensor |
| Motion detection distance | up to 12 m |
| Motion detection angles | horizontal €” 88.5° vertical €” 80° |
| Motion detection speed | from 0.3 to 2.0 m/s |
| Sensitivity | 3 levels |
| Pet immunity | weight: up to 20 kg height: up to 50 cm |
| False alarm prevention | SmartDetect |
| Temperature compensation | Effective motion detection at temperatures from ˆ’10°C to +40°C. |
| Photo verification | |
| Photo by Alarm | A built-in camera is activated if the detector is armed, and motion is detected. |
| Photo on Demand | User takes pictures at any time or when the detector is armed (depends on settings). The feature is disabled by default. |
| Photo by Scenario | A detector camera takes pictures automatically when Ajax fire detectors are triggered. The feature is disabled by default. |
| Photo by Schedule | The detector automatically takes photos at a specified time. This feature is available for hubs (except Hub Jeweller) with firmware version OS Malevich 2.19 or higher. |
| Photo resolution | 640 x 480 px 320 x 240 px (by default) 160 x 120 px |
| IR backlight | For night photography and low light conditions. |
| Pictures in a series | from 1 to 5 images with resolution of 320 x 240 px or 160 x 120 px from 1 to 3 images with resolution of 640 x 480 px |
| Photo delivery time | up to 7 s €” 160 x 120 px resolution up to 9 s €” 320 x 240 px resolution up to 20 s €” 640 x 480 px resolution |
| Recommendations | It is recommended to install the detector at a height of 2.4 m. The device is designed for indoor use only. |
| Anti-sabotage protection | |
| Tampering alarm | Alerts of attempts to detach the detector from the surface or remove it from the mounting panel. |
| Protection against spoofing | device authentication |
| Communication loss detection | within 36 s |
| Power supply | 2 x CR123A battery, 3 V |
| Battery life | up to 4 years - with Photo on demand toggle disabled up to 3 years - with Photo on demand toggle enabled |
| Enclosure | |
| Dimensions | 135 x 70 x 60 mm |
| Weight | 167 g |
| Operating temperature range | from ˆ’10°C to +40°C |
| Operating humidity | up to 75% |
| Protection class | IP50 |
| Colour | Black or white |
| Complete set | MotionCam (PhOD) Jeweller SmartBracket mounting panel Installation kit 2 x CR123A battery (pre-installed) Quick Start Guide |
